Hp Photosmart C4450 Turn Power Off Then on Again

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP All-in-1, Fax, and Copier Products - 'Plough Ability Off then On' Message Displays on the Control Panel

Issue

The error message 'Turn Power Off then On' displays on the product command panel.

This certificate applies to the 'Plow Power Off and then On' bulletin only. If you receive a unlike bulletin, try searching once again for another document that addresses the exact message yous run into.

Solution one: Turn the product off and then on once more

Follow these steps to resolve the fault message. Information technology might not be necessary to complete all of the steps to fix the effect.

Stride one: Disconnect all information cables and devices from the production

1. Disconnect any USB, Ethernet, or parallel cables from the rear of the product.

   caution:

   Do non disconnect the ability string during this step.

   Figure : USB connection

   

   Figure : Parallel connection

   

2. Remove whatsoever memory cards or USB drives you have inserted into the product.

   Figure : Examples of memory cards

   

   Figure : Example of a USB drive

   

Stride two: Plough the product off and then on

1. Press the Power push button () to turn off the product.

   • Is your power push unresponsive?

     If the ability button does non respond and your product will non plow off, proceed to the step to Reset the product.

2. Wait 15 seconds.

3. Press the Power button () to turn on the product.

4. Check the display for the error message.

• If the fault message does not brandish, skip to the stride to reconnect the information cables and devices.

• If the error message displays again, skip to the solution to check the power connections.

• If a different error message displays, go on to the next stride.

Step 3: Reset the product

1. With the printer turned on, disconnect the power string from the rear of the printer.

2. Unplug the power cord from the wall outlet.

3. Look at to the lowest degree 15 seconds.

4. Plug the ability cord back into the wall outlet.

5. Reconnect the power cord to the printer.

6. Turn the printer on.

• If the error message does not display, proceed to the adjacent step to reconnect the data cables and devices.

• If the error bulletin displays again, skip to the solution to bank check the ability connections.

• If a different error message displays, search for another certificate that addresses the exact message yous see.

Footstep four: Reconnect the information cables and devices

1. Press the Power push () to turn off the product.

2. Reconnect one USB, Ethernet, or parallel cable to the rear of the product.

3. Press the Power button () to turn on the production.

4. Check the display for the error bulletin.

• If the fault message does not display, reconnect some other cable, and so repeat steps 2 through 4.

• If the error message displays, replace the cable you just reconnected with a new one. Get to the How to Buy HP folio to buy the replacement power supply for your product.

Solution two: Check the power connections

Follow these steps in the society provided to make sure that the power connections between the product and the power source are secure.

Footstep one: Decide if the product uses a ability cord or a power module as the power supply

If the power supply is a string with electric connections at each end, the product uses a power cord.

Effigy : Power string

If the ability supply is a string connected to a module or box, the product uses a ability module. The power module might have a permanently fastened power cord, or the power cord might detach from the power module. The term power module refers to both the power module and the power string.

Figure : Power module with power string permanently fastened

Figure : Power module that uses a detachable ability string

Of import If the product uses a power module, make certain that the power module part number is the same as the part number listed in the User Guide to make sure that you lot have the correct power module.

• If the ability module part numbers match, go on to the adjacent step.

• If the power module office numbers do not friction match, supercede the power module. Go to the How to Buy HP page to purchase the replacement ability module for your production.

Footstep two: Check the electric connections and wall outlet

Click the Plus sign () side by side to the blazon of power connector your product uses, so follow the instructions to check the electrical connections.

Ability cord

1. Disconnect the power cord from the rear of the product.

2. Unplug the power cord from any ability strips or surge protectors.

3. Expect xxx seconds

4. Plug the power cord directly into a wall outlet.

5. Reconnect the power cord to the rear of the production.

6. Printing the Ability button () to turn on the product.

7. Monitor the product to see if it turns on, then off again.

   • If the production remains on, you might have likewise many devices plugged into the power strip or surge protector. You might also demand a new power strip or surge protector.

   • If the product turns off, the source of the problem is the wall outlet. Proceed to the next stride.

Power module

1. Disconnect the ability module from the rear of the production.

2. Unplug the ability module from any power strips or surge protectors, and then wait 30 seconds.

3. If the product uses a ability module that uses a detachable ability cord, reset the power module by doing the following:

   1. Unplug the ability cord from the power module.

   2. Plug the power cord back into the power module.

4. Plug the power module directly into a wall outlet.

5. Reconnect the power cord or power module to the rear of the product.

6. Printing the Ability button () to plow on the product.

7. Monitor the production to see if it turns on and and then off again.

   • If the product remains on, you might accept too many devices plugged into the power strip or surge protector. You lot might also need a new power strip or surge protector.

   • If the product turns off, the source of the trouble is the wall outlet. Continue to the next step.

Pace three: Relocate the power string or power module to some other room

Click the Plus sign () next to the blazon of power connector your product uses, and so follow the instructions to relocate the power cord or power module.

Power cord

1. Disconnect the ability cord from the rear of the product.

2. Unplug the power cord from the wall outlet.

3. Motion the power cord to another room, and then plug it into a wall outlet in that room.

4. Reconnect the ability string to the rear of the product.

5. Press the Power button () to turn on the production.

6. Monitor the product to see if information technology turns on so off again.

   • If the product remains on, you might have a problem with the circuit in the original room. Make sure that you do not have too many items plugged into the outlets in the room.

   • If the production turns off, continue to the side by side pace.

Ability module

1. Disconnect the power module from the rear of the product.

2. Unplug the power module from the wall outlet.

3. Move the power module to another room, and then plug information technology into a wall outlet in that room.

4. Reconnect the ability module to the rear of the product.

5. Press the Ability button () to plow on the product.

6. Monitor the production to see if it turns on then off again.

   • If the production remains on, you might have a problem with the circuit in the original room. Make sure that you do non have too many items plugged into the outlets in the room.

   • If the production turns off, continue on to the adjacent step.

Pace four: Replace the power string or power module

Go to the How to Buy HP page, then follow the on-screen instructions to order a replacement ability supply for your product.

• If these steps resolved the outcome, you practise not demand to go along troubleshooting.

• If the issue persists, continue to the next solution.

Solution three: Service the product

Service or supersede your HP production if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a production repair or replacement. If you are in Asia Pacific, you will be directed to a local service centre in your surface area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

whislerwhichave.blogspot.com

Source: https://support.hp.com/in-en/document/c01369982

Share this post